Do you have a Power Tools case?

Office Call us at 1 (800) 358-9909
Free initial phone consultation for attorneys and insurance representatives

Power Tools

Post image for E-Mail 'Power Tools' To A Friend

E-Mail 'Power Tools' To A Friend

Email a copy of 'Power Tools' to a friend

* Required Field






Separate multiple entries with a comma. Maximum 5 entries.



Separate multiple entries with a comma. Maximum 5 entries.


E-Mail Image Verification

Loading ... Loading ...

Our engineers have been assisting attorneys and insurance representatives in investigating accidents since 1990. We have a highly qualified staff of engineers with advanced degrees from top-tier universities who have provided testimony on behalf of both plaintiffs and defendants at trial

Previous Cases

Portable grinder fatality

A construction worker was using a portable angle grinder on a job site. The grinder had been designed to accept a 4 ½” grinding wheel; however the worker had improperly installed a 8” cut-off wheel. The larger wheel was rated for less than 8,000 rpm, but the angle grinder was rated at 11,000 rpm. This overspeeding of the cut-off wheel let to it flying apart, striking the worker in the head and killing him. We were able to show that the guarding on the angle grinder did not meet applicable standards, and that this contributed to the worker’s death. We also noted that the relevant warnings on the grinder should have been made more conspicuous.

Pneumatic punch chipping

A mechanic was using a pneumatic air hammer and a punch to disassemble a defective wheel bearing. He was wearing safety glasses, though they did not have side protection. During the hammering, the punch broke, resulting in a flying piece striking the mechanic’s eye. We determined that the resulting injury was caused by the lack or side protection on the safety glasses, as well as the lack of mechanical toughness of the punch.